You are here: Home » FURNACE TYPE » Tunnel Continuous Type » tunnel type coating line

PRODUCT CATEGORY

PRODUCT LIST

FURNACE TYPE

CONTACT US

Hot Line

+86 25 85718018

E-mail

ndly@ndly.com.cn

Website

www.ndfurnace.com

Office Address

No.19 Shangba Dongnan Road, Longtan Street, Qixia District, Nanjing, China
Post code: 210059

Click Here

Share to:

tunnel type coating line

1 Equipment Application
▶ This equipment is supplied for kinds of core with water base painting drying.
2 Facility Requirement
▶ Power Supply: 3 phase 4 wire system, 415/240V±10%，50Hz±5%.
▶ LPG main pipe pressure: 15kPa, Calorific Value: 10000Kcal/m3.
▶ Compressed air pressure: 0.5MPa～0.7MPa
▶ On-site condition:
- Out door temperature: -10℃～40℃.
- In door temperature: above 0℃.
- Relative Humidity of out door: 61%～81%
▶ Working System: 3 shift per day, 8 hours per shift.

Quantity:


Inquire Add to Basket

Model: ND-200
Brand: Nianda
Code: 00005

Product Description

Product Description

1 Equipment Configuration

NO.	Item	Quantity
1	lfting table	2 Sets
2	Load/unload roller conveyor	2 Sets
3	Furnace Body	1 set
4	Heating Chamber	3 sets
5	Air-curtain System	2 sets
6	Exhaust Piping (Length confirmed later)	Pipe from furnace body to inlet of fan.
7	Cooling Chamber	1set
8	Pallet Return Roller Conveyor	1set
9	Safety Guardrail and Working Ladder	1 set
10	Working Platform	1set
11	Electrical Control System	1 set

4 Main Technical Parameter

No.	Item	Technical Parameter
1	Painting type	Water Base Coating Material
2	Coating Method	Dipping/soaking/brushing
3	Effective Width of Inner Roller Conveyor	650mm
4	Effective Length of Inner Roller Conveyor	29800mm
5	Maximum Working Temperature	250℃
6	Drying Temperature	160～230℃ adjustable
7	Drying Time	45-55 Minutes adjustable
8	Temperature Heating Up Time	＜60 minutes
9	Energy Source	LPG, Calorific value: 10000Kcal/Nm3
10	Maximum Gas Consumption	90 Nm³/h (full loaded, at cold condition)
11	Burner Capacity	25～90 Nm³/h
12	Average Gas consumption	72Nm3/h (continuous running )
13	Remain water Content in core	＜0.30%(at depth of 10mm )
14	Transfer method	Roller Conveyor
15	Inner Roller Conveyor Speed	0.45～0.75m/min
16	Installed capacity	45Kw 415V 50Hz

*Verify Code